Parts & Accessories
$36.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm
- Designed to maximize bottle capacity on small frame bikes and dual suspension frames
$41.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Three slots for additional adjustments over the B-RAD 2 base
- Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
$45.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Long, four-slotted mount allows two, smaller bottles to be mounted in-line
- Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
$52.95
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options.
- Mounts to bottle bosses, or to the B-Rad base for additional carrying options
- Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches)
- Cradle strap is 40mm wide and 350mm long for supporting loads
$45.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back.
- Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames)
- 6061-T6 aluminum brackets, stainless hardware
- Weight (no hardware) – 20g
- Maximum load 1700g
- Designed to carry two bottles or accessories off of one B-RAD base
$45.95
B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items.
- Mounts to the B-Rad base mount (not included
$70.95
The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it.
- Mounts to the B-RAD system or on its own
- Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)
$17.95
The Wolf Tooth Cargo Strap is a versitle way to secure and repair almost anything. It is quick, secure, and durable with the aluminum buckle. Pair with the Wolf Tooth Cargo Cage or use it on just about anything you need to hold in place or bundle.
Tech Specs:
- Weight: 28.5g
- Dimensions: 20" long strap (21" with buckle); .75" wide
- Material: aluminum buckle
$32.49
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
$10.99
QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags.
- Material : Injected Nylon
- Weight: 30g / 1.06 oz
$19.99
QR clamp for attaching DynaPack to seatpost. Includes adapters for different seatpost diameters.
$44.99
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options.
- Fits tubes 20-60mm.
- Engineering grade polymer
- 64 mm mounting height adjustable
- Weight: 128g
- Max load: 3kg / 6.61lb
- Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
$9.49
QuickClick mount for spring-style saddles. Works with all Topeak Wedge Bags.
- Material: Injected nylon / Stainless steel
- Weight: 50g / 1.76oz
$14.99
The Bungee Booster is a quick and easy way to add some extra capacity (as well as some color) to any of our bags with parallel webbing daisy chains. Just lace the durable elastic cord through the loops of the daisy chain and slip the cord lock on for adjustability. Cut to length to fit whatever bag you choose.
$14.99
The Bungee Booster is a quick and easy way to add some extra capacity (as well as some color) to any of our bags with parallel webbing daisy chains. Just lace the durable elastic cord through the loops of the daisy chain and slip the cord lock on for adjustability. Cut to length to fit whatever bag you choose.
$14.99
Designed to secure our Every Day Caddy to your saddle, the 15" Swift Strap is a durable nylon buckle strap. Keep one or two extra in your tool kit for last minute repairs or to lash modular gear to your setup.
Dimensions:
- Measurements: 15" long x 3/4"
- Weight: 0.8 oz
Materials:
- Nylon buckle
- Polyurethane
$14.99
Keep your gear secure and the stoke high with these slip-resistant, super-bomber polyurethane 9" Swift Straps. Not only are they perfect for lashing your Swift bags to your handlebars, saddle, or top tube, but also work as an on-the-go attachment straps for layers you shed or goodies you pick up along the way. With the Swift Strap Set you’ll never think twice about your bags or accessories going OTB, even on the roughest of terrain.
Dimensions:
- Measurements: 9" long x 1/2"
- Weight: 0.3 oz
Materials:
- Nylon buckle
- Polyurethane
$29.00
Our smallest strap ideal for lighter objects.
Secure anything to a bicycle without scratches with these flat cargo bicycle straps - no hooks cargo straps!
2 straps per package.
$153.00
Fit Kit SET723.R contains all the parts to mount the rack to the rigid fork of a road or gravel bike with a 12 mm thru axle..
This kit includes:
- 12 mm thru axle with 129 to 135 mm length and 1.0mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack’s load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
Fit Kit Finder: https://oldmanmountain.com/fit-kits-and-spare-parts/#fit-kit-finder
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET706.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle.
This kit includes:
- 12 x 125mm thru axle with 1.0 mm thread pitch, with spacer for 119mm spacing
- A pair of mounting pucks, for bikes without upper eyelets.
- Ultra strong and UV stable Panduit Zip Ties
- Clear protective tape, for underneath the pucks and Zip Ties
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits.
- Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET712.R contains all the parts to mount the rack to the rigid fork of a road or gravel bike with a 12 mm thru axle.
This kit includes:
- 12 x 122mm thru axle with 1.75 mm thread pitch
- A pair of mounting pucks, for bikes without upper eyelets.
- Ultra strong and UV stable Panduit Zip Ties
- Clear protective tape, for underneath the pucks and Zip Ties
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET724.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle..
This kit includes:
- 12 x 134 mm thru axle with M12 x 1.5 mm thread pitch
- Spacers to reduce the length to 128 mm
- A pair of mounting pucks, for bikes without upper eyelets.
- Ultra strong and UV stable Panduit Zip Ties
- Clear protective tape, for underneath the pucks and Zip Ties
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
If mounting on a Fox Gravel Fork, please also order 377-1240.
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$157.00
Fit Kit SET806 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your fat bike with a 12mm rear thru axle.
This kit includes:
- 12 x 209mm thru axle with 1.5 mm thread pitch
- Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all fat bike tire sizes.
- Pair of 14" extenders. Stabilize and level the rack.
- A pair of OMM Pucks. Allows for an upper attachment point for the rack.
- Stainless steel mounting hardware
- Clear protective tape
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm..
$153.00
Fit Kit SET810 is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
This kit includes:
- 12 x 192—198mm thru axle with 1.75 mm thread pitch
- Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes.
- Pair of 14" extenders. Stabilize and level the rack.
- A pair of OMM Pucks. Allows for an upper attachment point for the rack.
- Stainless steel mounting hardware
- Clear protective tape
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$157.00
Fit Kit SET809 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle.
This kit includes:
- 12 x 209mm thru axle with 1.75 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$157.00
Fit Kit SET807 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle.
This kit includes:
- 12 x 217—229mm thru axle with 1.75 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET727 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle.
This kit includes:
- 15 x 135 mm thru axle with M15 x 1.5 mm thread pitch, with a spacer to reduce to 130mm
- A pair of mounting pucks, for bikes without upper eyelets.
- Ultra strong and UV stable Panduit Zip Ties
- Clear protective tape, for underneath the pucks and Zip Ties
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$8.00
Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.
$8.00
Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.
$8.00
Did your hardware roll into the blackhole under your workbench? No worries, we have all of our hardware kits available.
Page 1 of 2
Next page