Handlebar Grips/Tape

Serfas' RX Grips have been medically engineered to eliminate numbness and fatigue. Strategically placed Ulnar Grooves divert pressure from critical nerves and arteries. Plus, the diamond shape top layer and dual-density compound provides an excellent grip and absorbs vibration for a super-smooth ride and total control and comfort.

Serfas' Synthetic Cork Bar Tape offers great comfort, grip and vibration absorption. This light, stretchy tape is easily installed thanks to the adhesive back and adds a touch of class to any bike. • Thin, Lightweight and Stretchable • Adhesive Backing for Easy Installation • Shock Absorbent • Washable

Serfas Synthetic Cork Tape is now 30% longer and includes color-coordinated stretchy electrical tape to finish the job right and keep your bars looking brilliant.

SRAM's Comfort Grips are made of compliant rubber in an ergonomic shape for excellent support and comfort. They have stylish SRAM logos and are built to stick tight on the handlebars and last.

When you're going fast, you need to hold on to something. SRAM's DH Silicone Locking Grips have you covered with clamps on both ends for a secure bar hold. Their rubber surface with thumb donut and "S" logo design offer a great feel.

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

SRAM's Handlebar End Plugs are just the thing for adding a fun, custom touch to your handlebar taping job. They feature SRAM's famous and stylish "Make the Leap" frog logo.

Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.

SRAM's Locking Foam Contour Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.

SRAM's Locking Foam Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.

SRAM's Locking Grips have clamps on both ends for a secure bar hold. Their rubber surface and "S" logo design offer a great feel.

• Replacement locking handlebar grip sets for X0 and XX Grip Shift • Available in 100mm and short length 85mm shifter with interlocking Grip Shift interface and single bolt clamp. • Available in full-length 122mm grips with dual locking bolt clamps. • Available in black and silver.

• Replacement locking handlebar grip sets for XX1 Grip Shift • includes one 100mm right and one 122mm left grip • Available in black or silver.

SRAM's RED Bar Tape is perfect for upgrading your handlebars and adding comfort and style to your bicycle, too. You get enough handlebar tape to wrap both sides, S logo plugs for a touch of class, and a texture that matches SRAM's RED shifter/brake hoods.

SRAM Racing Grips offer a great grip for total control and come in several sizes to fit your front-end setup. These durable rubber grips have stylish logos stamped in them and are built to last and not slip.

- Clear, gel pads provide added shock absorption while positioned between the lever hood and top-handlebar transition under handlebar tape - Two, left and right sets with integrated channels for either inside or outside, under tape cable routing

SRAM's SuperCork Bar Tape looks good and feels great. This light, stretchy tape is easily installed and adds a touch of class to any bike.

SRAM's SuperCork Bar Tape boasts a soft, stylish suede finish for a great grip and feel with or without gloves.

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends

Our initial partnership with Aaron Gwin produced numerous innovations that pushed grip technology to new levels. With the new AG2 Grips, we wanted to take things even further. We started with an ultra-soft pro compound and built it into an improved knurl pattern that provides extra tackiness and control along with reduced vibration transfer. We coupled this with our exclusive offset design that offers even more impact dampening where it is needed most, without increasing the grip diameter. We then redesigned the most impact-prone portions of the grips to provide an even better feel and accurate control when riding. - Grips feature a larger diameter than the original grips (30.5mm) with offset padding towards the rider for improved comfort - Soft Pro compound provides excellent shock absorption - Redesigned surface pattern for improved traction and vibration dampening - Redesigned ends provide an improved feel - Provide extra durability against grip blowout - Thin ribs add control without a bulky feel - Uses our race-proven Version 2.1 Lock-On system - Molded over the aluminum endcap, the end provides durability but will not gouge

- Developed in collaboration with 2x World Cup Champion Aaron Gwin - Ergonomic single clamp design with aluminum reinforced ends - Angled rib pattern matches the articulation points of your hand - Bonus pack includes Lock-On grips and v2.1 clamp

The attack mountain bike grips offer legendary performance preferred by top athletes for over two decades. - Classic mushroom style rib pattern - Durable grip compound - Excellent shock absoprtion from rib pattern - Thick rounded ends to protect against grip blowout

ODI Bjorn lock-on V2.1 grips. Made from recycled post-industrial rubber from ODI's manufacturing, the Bjorn grips have an offset center to provide additional cushion without extra bulk. - Made from recycled TPE rubber - Single-sided lock on

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

- Designed with help from Tinker Juarez - Large diameter grip at 34.5mm - Offset grip design provides more padding on the palm side of the grip - Soft TPE end offer improved comfort and grip protection - Made from ODI exclusive A.I.R.E compound for reduced weight and improved vibration dampening - Contoured surface for improved comfort on longer rides - Ergonomic finger cutouts provide improved grip in all condition - Version 2.1 Lock-On system ensure 100% slip-free performance

ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. - Offset grip design provides padding where it is needed most - Variable knurl pattern provides comfort/traction where you need it most - Version 2.1 Lock-On System - Soft Pro compound for excellent shock absorption - Reinforced soft ends for added durability - Super slim profile

- Ergonomic design conforms to riders hand without feeling bulky, provides padding where it is needed most - Half-Waffle pattern on the front of the grip provides extra control when you are off the back of the bike - NEW SINGLE CLAMP—Version 2.1 Lock-On System for more usable grips space and improved comfort on the outside of the grip - Variable knurl pattern alternates from smooth to sharp texture to provide more traction without irritating your hands. - Reinforced End molded out of soft, but durable material to prevent grip blowout.

- Ergonomic design conforms to riders hand without feeling bulky, provides padding where it is needed most - Half-Waffle pattern on the front of the grip provides extra control when you are off the back of the bike - NEW SINGLE CLAMP—Version 2.1 Lock-On System for more usable grips space and improved comfort on the outside of the grip - Variable knurl pattern alternates from smooth to sharp texture to provide more traction without irritating your hands. - Reinforced End molded out of soft, but durable material to prevent grip blowout.