Wheels

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Sovos, KK, KT 9.5mm x 26tpi - Compatible with 9.5mm x 26tpi axle - Cone Wrench Size: 13mm - Threads: 9.5mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag COMPATIBLE HUBS: - JoyTech, Sovos, KK, KT 9.5mm x 26tpi - Taiwanese hubs with 9.5mm x 26tpi axle

The updated team favorite, FX2 freecoaster hub. Featuring proven KHE based internals, a 9T dual-sealed bearing driver with additional bushing, and a super-strong heat-treated Chromoly 14mm axle with 6mm internal hex for easier maintenance. Updated with the DTC system, changing drive side only requires a driver change instead of a whole hub replacement. Slack can be adjusted from 55 degrees up to 180 degrees depending on your preference, and ships with 156 degrees slack as standard. The included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box. - 9T Freecoaster - Axle: 14mm Hollow Heat-Treated Chromoly - Axle Nuts: 17mm Chromoly - Shell: 6061-T6 Aluminum 36-hole - Bearings: 1 x 6002, 1 x 7905, 2 x 6902 + Bushing - Clutch: DTC (Dual Threaded Clutch) - Cones: Threaded Drive Side and Non-Drive Side - Guards: Compatible with Cinema DR and CR hub guards - Slack: Includes 3 Slack Washer For Fine Tuning - Weight: 25.3oz (w/Guards Installed)

The 333 is a double-walled, pinned rim with a concave shape that increases strength and stiffness. Get rolling at an affordable price while keeping your wheels looking fresh. All Cinema rims include a Cinema rim strip.

A pair of lightweight, 17mm aluminum axle nuts. - 14mm fits most rear axles (M14xP1.0) - 3/8" fits most front axles (3/8x26T) - 7075-T6 aluminum - Weight: 0.8oz

A pair of steel axle nuts. - 17mm wrench flats

Designed to fit most rear hubs, sliding over the existing hardware on the non-drive side. Constructed from 100% heat-treated chromoly, the Mission Guard is guaranteed to hold up to a long life of grinds on all surfaces! Product Specifications - Material: Heat Treated Chromoly - Axle Size: 14mm - Compatibility: Most rear hubs - Weight: 4.0oz

Refined and re-refined, the VX3 cassette hub packs in all the features and durability you want and need in a hub. The design has been updated to a more resilient floating axle system, with the tried and true 14mm heat-treated Chromoly male axle. The SDS driver system also allows you to easily switch between left or right-side drive without any additional parts. Ceramic bushings found inside the 9t driver unit eliminate any blown-out bearings, and spin directly on the axle creating room for increased axle thickness. Finally, the included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box. - Axle: 14mm Heat-Treated Chromoly - Axle Nuts: 17mm 7075-T6 Aluminum - Shell: 6061-T6 Aluminum 36-hole - Hub Bearings: 2 x 6902 - Driver Bearings: Ceramic Bushing - Driver: 9-Tooth - Drive Side: RHD / LHD Switchable (SDS) - Cones: Thread-On - Guards: Includes DR Rear Hub Guard and CR Rear Hub Guard - Weight: 19.6oz (w/ Guards Installed)

The ZX 333 rear wheel is the most affordable wheel in our line. Featuring a double-wall pinned 333 rim laced to a fully sealed cassette with 14mm male axles and 9T driver. All Cinema wheels come with a Cinema rim strip and Cinema hub guards! - Hub: Cinema ZX Cassette - Driver: 9 Tooth - Rim: Cinema 333 - Spokes: 36 stainless steel - Weight: 3 lbs 1 oz

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech, Joy U, KK 10mm x 1, rear - Compatible with 10mm x 1 axle - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 17.0mm - Length: 13.8mm - 1 cone per bag COMPATIBLE HUBS: - Joytech, Joy U, KK 10mm x 1, rear - Taiwanese rear hubs with 10mm x 1 axle

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 10mm x 26, rear hub - Compatible with 10mm x 26 axle - Cone Wrench Size: 15mm - Threads: 10mm x 26 - Diameter: 17.0mm - Length: 13.8mm - Note: O-ring / seal not included. - 1 cone per bag COMPATIBLE HUBS: - JoyTech 10mm x 26, rear hub - Taiwanese hubs with 10mm x 26 axle

- ProLock: pre-prepped/treated nipple threads with special compound - Hexhead (14g only) design for building/truing at nipple head, in addition to 4-sided flats at rim protrusion - Form-A design assures smooth fit and build - Cold-forged nipple blank machined to DIN 79012 specs - 14mm overall length (2mm taller hexhead for wrench interface, but protrusion through rim is the same as a 12mm DT nipple) - 2.0mm (14g) spoke thread interface with full run-through - Made in Switzerland. - Box/100

You like gravel and wide tires? This is your rim. The GR 531 is made for off-road adventures. This aluminum gravel rim with an inner width of 24 mm is designed for wide, knobby tires up to 53mm. Torsion-resistant and robust, the welded rim supports a wide range of gravel use.

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening

The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - Weight: starting at 20g for 64 nipples

A 40mm inner width support wide tires, while the welded rim keeps the weight low. Super-wide tires provide real traction, control, and safety, even on very difficult trails. The DT Swiss XM 551 rim is the ideal counterpart to those beefy tires. An extra-strong alloy specified by DT Swiss, the proprietary PHR nipple system, and excellent tubeless compatibility make it possible to harness the full potential of these new tires.

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

Tough enduro carbon rim paired with a durable 240 hub—a recipe for going fast. The EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in one wheelset. The 30mm-wide carbon rims give you the precision to stay on track, even on the trickiest lines, while a 240 hub with the latest RATCHET EXP freehub system puts your power down to the ground. Both components are held together by performance-to-weight-optimized competition race straightpull spokes.

The aluminum Enduro wheelset made for the roughest Enduro tracks around the world. We have taken all our aluminum wheel know-how and put it into this high-performing package. EX 1700 SPLINE wheels are based on our famous 36T RATCHET hubs combined with a super-strong and welded 30mm-wide aluminum rim. The rim profile is designed to withstand the hardest use of Enduro racing while still keeping the weight low for long and demanding uphills. Laced to double-butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating.

DT Swiss Sinc Ceramic cartridge bearings. - The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally

Introducing the Gravel racing GRC 1400. With a holistic approach of engineering DT re-thought the characteristics of a modern benchmark setting gravel wheel set. Aerodynamic efficiency, ideal support of wide gravel tires leading to comfort and traction off-road as well as remarkable durability are only some of the key features that make this wheel set the perfect companion for your next gravel adventure. - 42mm aero-optimized rim depth for 35mm wide gravel tires

The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples

As versatile as it is robust—a rim for all surfaces! Anyone wanting to build a reliable, super-stiff wheel is starting in the right place with the RR 511. Thanks to a state-of-the-art alloy and surface treatment, this extremely robust 32mm high semi-aero rim is lighter than you would think. And, those thinking of using it on Gravel or Cyclocross courses can easily install tubeless tires.

The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub completes this durable and versatile wheel. - Designed for All Mountain applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes. - Designed for Enduro applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

Excellent aerodynamics and safe steering behavior for a decisive competitive advantage; the ARC 1100 DiCut wheels are made to go flat out fast. Drag and steering movements are reduced thanks to the AERO+ rim that's been aerodynamically optimized by Swiss Slide- these high-end quality wheels are ready to win.

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.