Brakes/Levers/Pads

Smooth post cantilever pads - 70mm pad length

- Molded road brake pads - 50mm pad length

Fits Shimano / SRAM cartridge pad style carrier - All season compound - Length: 55mm - Black

Fits Shimano / SRAM road calipers - All-season compound - Includes mounting bolts and washers - Length: 55mm - Black

- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair

Disc Brake Adapters

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Avid's Rear 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the back of your bike. Kits include mounting bolts and a 30mm post mount spacer for rear brake installation.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

Bolt on Avid's Shorty Ultimate Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Avid takes entry level to a whole new level with the BB5s, which feature ball bearings (where the BB comes from in the name), a melt-forged body and a CleanSweep rotor for excellent stopping power and awesome durability. Plus, an inboard pad adjustment knob lets you dial in the perfect distance between the rotor and the pads, while Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds. And, the tool-free pad replacement and adjustment makes quick work out of accommodating for pad wear, so you always have positive, powerful braking.

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that allow the caliper to move as you install your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get excellent caliper alignment! This kit includes ultra-light titanium hardware with washers for CPS (Caliper Positioning System) mounting.

For the ultimate light-weight brake setup, Avid ditched the concentric caliper-centering washers and gave you titanium bolts to save precious grams. This kit includes ultra-light titanium hardware for standard (direct-mount) mounting.

The power starts here. With a unique design that helps keep dirt and grime from mucking up your ride, Avid's CleanSweep rotors provide the power you need in the lightweight package you want.

Perfect for your road, touring or cross bike, Avid's BB5 Road brakes have all the power you need. Used with your road-style levers, they sport precision actuation as well as tool-free pad replacement. Plus, Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.

This upgraded version of the BB7 has a durable anodized finish and stainless steel hardware. - For use with with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed organic pads - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 204 g

This upgraded version of the BB7 has a durable anodized finish and stainless steel hardware. - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Due to the shape of the brake pad installation tabs, this model is not compatible with Centerlock or HSX rotors - Includes steel-backed organic pads - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 204 g

Avid's BB7 MTN S Mechanical Disc Brake delivers with power, control, and a sleek black anodized finish that makes this brake look as fast as you feel. You'll love the simple cable pull system that's optimized for linear-pull levers. Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition. This brake kit includes an HS1 rotor for solid stopping power.

This high-end version of the BB7 has a durable anodized finish and titanium hardware, as well as lighter brake pads. - For use with short cable-pull levers - Includes aluminum-backed organic pads - For use with short cable-pull levers - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No - Weight: 184 g

The eeBrake G4 is the fourth generation eeBrake featuring 100% CNC machined parts and a wider design optimized for 22-28mm rims. It features a stiffer black arch spring, a revised one-piece center adjuster with built-in resistance for easier use, and ghosted laser etching that will stand the test of time. All with the same stopping power and light weight that you've come to rely on from eeBrakes. - The eeBrake cable adjuster pivots as the brake is applied, optimizing cable alignment during brake actuation - The cross cable path aligns the brake cable over the center of the brake which provides a clean and aerodynamic line, moving the cables into the "wind shadow" of the frame - Tool-free caliper centering adjustability provides super-precision and pad motion consistency - One simple flip of the lever on the Quick Strut release opens wide enough to easily clear a 31mm tire, allowing for easy wheel removal - Optimized to work with Shimano, Campagnolo, and SRAM levers

PR1400 OXiC Disc Brake Pads - Brake pad inserts are made by Swiss Stop

PR1400 OXiC Disc Brake Pads - Brake pad inserts are made by Swiss Stop

- 410 Stainless steel construction - (6) Black M5 mounting bolts - Weights: 68g (140mm) / 85g (160mm) / 112g (180mm)

- K-Force rotors feature a two piece design balancing weight and braking performance. Weight relieved alloy carrier for added rotor stiffness - Afterburner rotors have an increased surface area for better heat management - Rotors include: (1) 6-bolt/44mmBCD rotor with (6) T-25 rotor mounting bolts - 98g K-Force, 142g Afterburner

Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

Jagwire's Road Pro Inserts are a nice upgrade for Shimano and SRAM sidepull brakes. They're made of Jagwire's Pro Series compound in three versions for excellent stopping power in all conditions and with aluminum and carbon rims.

Jagwire's Mountain Pro Inserts are the correct replacement pads for Jagwire's Mountain Pro brake shoes (sold separately). These pads feature Jagwire's tried-and-true compound for excellent stopping power and durability.

Mountain Pro cartridge-style inserts are easy to install, durable, and are offered in two rubber compounds to suit different riding conditions. - Patented dimpled inserts reduce brake squeal - Inserts use the SRAM/Shimano mountain standard - Intended Brake Type: Linear Pull - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard

Jagwire's Road Pro Inserts (Campagnolo) are a nice upgrade for Campagnolo sidepull brakes. They're made of Jagwire's Pro Series compound in three versions for excellent stopping power in all conditions and with aluminum and carbon rims. Choose from Friction Fit and Click Fit for Campagnolo regular and Skeleton brakes respectively.

This simple repair part is vital for getting bikes with side-pull caliper brakes safely back on the road. - 6mm size

Jagwire's Basics Road Brake Pads feature their tried-and-true all-weather compound for excellent braking and durability.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Fit a variety of Formula brakes and offer industry leading brake compounds for consistent, confident performance

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Compatible with Shimano Dura-Ace R9170, Metrea U5000, Ultegra R8070, and Road RS305, RS405, RS505, and RS805 - Compatible with Rever MCX1 Flat-Mount and MCX2 Flat-Mount

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Organic pad for Magura 2-piston brake calipers - Fit a variety of Magura brakes and offer industry leading brake compounds for consistent, confident performance

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Mountain Pro Brake Pads are a nice upgrade for your linear-pull and cantilever brakes. They feature cartridge-style pads that are easily replaced when the time comes. And the pads are made of Jagwire's tried-and-true all-weather compound for excellent stopping and durability.

Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.